Standard Height of Shower Valve From Floor and Diverter

Posted on

When shopping for a new shower valve, remember to consider the height of shower valve of the user. A tall and bulky valve will obstruct the air flow in a room, so a shorter height will be more comfortable. ADA standards and building codes will also be important.

To help you select the right height, measure the width of the room where the shower is to be installed, and compare the different models of the same model.

Height of Shower Valve From Floor

Height of Shower Valve

Before you install a new shower valve, consider the height of the users in the bathroom. You can choose between a 36-inch and a 48-inch height, depending on the height of the people who will be using the shower.

If you’re installing a new shower spout or valve, the height should be set at a suitable height. Taking into consideration the user’s height and the amount of space available, you can choose the ideal height of the valve.

The height of the shower valve is important because it can create a significant ergonomic burden. Make sure you know the height of the shower valve before you buy it. In general, taller valves deliver more water pressure than short ones.

Be aware that different manufacturers produce different heights, so it is important to consider the size of the bathroom. While choosing the correct height for a shower, keep in mind the size of the user and the height of the shower head.

Shower Valve Height Code

If you are installing a new shower valve, you should consider the height of the faucet. The standard for installing a shower valve is between 38 and 48 inches above the floor.

The American Disabilities Act (ADA) mandates that the height of a shower valve must be lowered to the height of a person with a physical disability. This means that if you are the tallest member of your household, you should install a shorter shower spout.

The normal height for valves in bathtub shower sets is 28 inches (2 feet 4 inches). Install the valve at 48 inches, or 4 feet, in shower stalls. Install faucets equidistant from the valve and at the same height as it.

Shower Valve Height Above Bathtub

If you’re planning to install a new shower valve, you’ll need to figure out the proper height. A 48-inch shower head needs a 24-inch valve, and vice versa.

The average height of an American male is about five feet eight inches, so you’ll need to plan accordingly. If you’re installing a new valve, you’ll need to leave around 44 inches between the valve and the piping.

For a 72-inch shower head, you’ll need to measure from the top of the faucet to the top of the bathtub’s base. A 42-inch shower stall requires a 48-inch shower valve.

In addition, a 52-inch-high valve will require a three-foot-plus space between the piping and fittings.

Height of Shower Valve from Shower Tray

The height of a shower valve should be about 8-18 inches above the shower tray. It is important to check your local building codes to make sure your installation meets local requirements.

Failure to comply with these codes may result in fines and even the need to remove the installation. To avoid such problems, you should always check with your architect before installing your valve.

Taking into account the average height of people in your household and the size of your shower enclosure will help you to select the right height.

Shower Head and Shower Valve Height Distance

The ADA (Americans with Disabilities Act) requires that you check the height distance between the shower valve and the shower head to ensure they are both reachable.

The standard is 8 inches between the hot-water faucet handle and the cold-water faucet handle. The distance should be 4 inches to the right or left of the valve.

The standard distance between the shower valve and the head should be 8 inches. The height distance should be no more than four inches.