You purchased a pair of Jlab Go Air earbuds, and now JLab Go Air only one working earbud. This is a common problem, but it can be easily solved by following a few steps. First, make sure that you are within the range of the charger.
The battery life is not as long as you would like, so try to charge the other earbud first. If that does not work, you should contact the manufacturer to get a replacement.
Jlab Go Air Only One (Right or Left) Earbud Not Working
The Jlab Go Air headphones have a software update available for download from the official website of the company. If the jlab go air only one working earbud right or left work, you may have to reinstall the device software on your iPhone.
Make sure to keep your earbuds in their charging case. Then, connect them to your iPhone. If they still don’t work, you should try to reinstall the software on your iPhone.
Possible Causes for One-Sided JLab Earbuds Not Working
If you have one of these earbuds, they may be not working on one side. This can happen for a number of reasons.
- It could be that the jack is not properly positioned or that the device has lost Bluetooth connectivity.
- If you have an Android device, you can turn on Bluetooth in the Settings menu and pair the device with your JLab earbuds.
- The paired earmuffs will be lit up solidly and you’ll hear the words “Bluetooth connected” when pairing the headphones.
How do you get JLab right or left earbud to work?
- First, try to turn off the Bluetooth on the iPhone. It may be that the device is not receiving power. This is common when your device is on standby.
- Secondly, if the Bluetooth is turned off, the earbuds won’t be paired. When this happens, the right earbud may not work. This could be due to the charging case’s battery level.
- If you have a newer version of the device, you may be able to turn off the bluetooth automatically and reconnect it to your iPhone.
Another cause for jlab go air only one working is the earbud isn’t in pairing mode. To pair it with your iPhone, click on the Bluetooth button on the right lobe and hold it for 3 seconds.
If it still doesn’t work, try resetting your iPhone or removing the old Bluetooth profile and trying again. Once it’s back on, you can play your favorite music without the hassle.
How do I know if my JLab earbuds are charging?
After you have a pair of JLab Go Air earbuds, you can charge the charger. To do this, use a flat object like a tire. You can also put a piece of electrical tape on the case to hold the wire.
This will keep the charger from slipping. If the cable is broken, you should try a different case charger. If this does not work, you can check the charging cable.
After pairing, remove the earbuds from their case and press the power button for 10 seconds. Your device will then automatically detect your JLab GO Air.
Upon successful pairing, you will see a blue and white LED indicator. If you have enabled Bluetooth on your device, you can pair the headphones and speaker. However, if you only have one working earbud, you may not want to waste your money.
How to Reset the JLab Go Air
If you’re experiencing problems pairing or using your JLab Go Air earbuds like jlab go air only one working, you’ll need to learn how to reset the unit.
- The first step is to remove them from your Bluetooth device.
- Then, tap the charging case’s earbuds seven times.
- After about 15 seconds, you should see the LEDs turn white and be solid white.
- Then, try pairing the device again.
You can also try to charge the case by pressing the earbuds in the case. When the earbuds are fully charged, they’ll glow blue. This means that the battery is charged.
Afterward, you can remove the earmuffs. Then, you can press the multifunction button three times while remaining within the charging range. This should turn your earbuds back on.
If you have a pair of JLab Go Air headset wireless earbuds, you may encounter connectivity issues. The earbuds may be unable to connect to the host device.
In such cases, you should perform a factory reset to restore your connection. It’s also a good idea to turn off Bluetooth in your Bluetooth device.
However, this method may not work in all cases. Check with the manual to make sure it’s still working properly.
Alternatively, you can remove the earbuds and try pairing them with another pair. But, if this doesn’t work, you might have to reset the charging case to get it working again.
You can also try to connect it to the same Bluetooth device. You can do this by connecting it to the device through the charging case. You’ll need to reset the Jlab Go Air in this way.
How to Turn Off JLab Go Air Earbuds
You may be wondering how to turn off JLAB GO AIR earbuds. The answer to this question depends on the way you are using the earbuds. If you don’t want to use them with any device, you can always remove the battery and place them back in the charging case.
Then, simply place them back in the charging case and close the case. You can also use the charging case to charge your EARBUDS. You can also place them in a bag or a pocket to prevent them from falling out of your pocket.
This is so that the Jlab Go Air is not easily damaged, because the damage that often occurs is:
jlab go air only one working.
Although the steps may vary slightly between models, we hope to provide some general information that will help with most of them. You can also get some troubleshooting suggestions straight from Jlabs by going to https://www.jlab.com/pages/manuals and selecting your model.