If shower that won’t stop running when you turn off your shower, chances are it’s due to a faulty valve or cartridge. A faulty cartridge will keep water from flowing even when you turn off the faucet, as it won’t provide a good seal at the control knob.
To repair this, you need to open the valve shower and replace the cover plate. After replacing the cover plate, tighten the screw back into place. The water should now stop running when you turn it off.
How do you fix a shower that won t turn off
If your shower will not shut off when you turn it on, the problem is likely related to the cartridge. These parts keep water from flowing when the faucet is closed.
In other words, when the valve is closed, water isn’t flowing through it. In order to fix the cartridge, you need to take it apart. To do this, you will need to have a screwdriver, a flat blade, and a piece of scrap wood.
If you are confident in your plumbing abilities, you can try to open the drain. In doing so, you may be able to locate a small screw that holds the handles or the cartridge in place.
You may also be able to pull out a plastic device that holds the cartridge in place, which can be easily accessed. If you have trouble doing this, you will need a hammer and a spanner to get into the control knob.
If you are unsure of how to repair a shower that won’t stop running, the first step is to check the water supply valve. This valve is usually located directly underneath the bathroom or in the basement. Simply turn the valve on to restore water flow.
You’ll need to remove some small parts from the faucet, as well. You can also use a sheet to prevent accidental damage to your tub or shower. You can also wear safety goggles and gloves so you don’t get injured by sharp edges.
Shower That Won’t Stop Running can be a frustrating problem to deal with. It’s a waste of water, and a simple fix can save you a lot of money.
The first thing to try is to check the cartridge. If it is damaged or leaking, it could be an issue with the cartridge. It may be necessary to replace the cartridge, but in most cases, replacing the cartridge is an easy fix.